1，it is alkali .
it may hurt skin and eyes.
Avoid direct contact while preparing electrolyte;
let out the remaining gas before adding water to
avoid the electrolyte spurting out.
If stained on
skin or in eye carelessly, wash with lots of clean water
,mixture water 2500CC.
3,Purtity: 99% .
4，be careful to use.
Pour 2500cc distilled water (or pure
water) into a container made of glass, china
or heat-resistant plastic
(warning: aluminium container is prohibitted). Put 1
bottle of electrolyte powder into the water
slowly, stir until it is dissolved
completely. It generates heat while
dissolving, and need to be cooled for about
first time of use, only water—the “fuel” need to be
added timely. Don’t add electrolyte again.
Theoretically, the electrolyte can be used
permanently. However after about 3 months of
operation it will become dirty or over-mixed with
ethanol, and should be changed because of losing
efficacy. To change electrolyte, open the outlet in
the bottom of the generator and drain off the dirty
electrolyte, wash the electrolyte case with pure
water, then screw on the outlet. Prepare and add new
electrolyte. This is to keep the electrolyte case
clean, thus avoiding the erosion of electrodes.
WARNING: OPERATE AND MAINTAIN THE MACHINE ACCORDING
TO THE USER’S MANUAL
BACK TO PRODUCT